Products – digilog.pk

03124002221

CATEGORIES

Products

(Pair Left + Right) 95mm Mecanum Omni-directional Wheels - with clear plastic frames, light blue centers, and grey rubber rollers.

(Pair Left + Right) 95mm Mecanum Omni-directional Wheels - with light blue centers and grey rollers arranged around the perimeter.

(Pair Left + Right) 95mm Mecanum Omni-directional Wheels

Rs 2,320

(st3p A-b) Analogue Timer/time Delay Relay - a circular dial marked 0-10 SEC, an adjustment knob, UP and ON indicator lights, and cardboard boxes.

(st3p A-b) Analogue Timer/time Delay Relay - a beige rectangular device featuring a large circular dial marked 0 to 10 seconds, a 220 VAC label, and a small side display.

(st3p A-b) Analogue Timer/time Delay Relay

Rs 860

0 to 10V 0-5V To 4-20mA Converter Module Voltage To Current Module - a green circuit board with two blue screw terminal blocks and two adjustable potentiometers.

0 to 10V 0-5V To 4-20mA Converter Module Voltage To Current Module - a green circuit board with a black integrated circuit, blue relay components, and labeled VCC, Iout, and GND pins.

0 to 10V 0-5V To 4-20mA Converter Module Voltage To Current Module

Rs 910

0 To 12V DC Motor Mabuchi Cw 2400RPM - a silver cylindrical motor with a small metal shaft and two attached red and white wires.

0 To 12V DC Motor Mabuchi Cw 2400RPM - a silver cylindrical motor with a central shaft, mounting holes on top, and two attached red and white wires.

0 To 12V DC Motor Mabuchi Cw 2400RPM

Rs 210

0-30V 2mA-3A Adjustable DC Regulated Power Supply DIY Kit Short - a red printed circuit board and various electronic components including resistors and diodes.

0-30V 2mA-3A Adjustable DC Regulated Power Supply DIY Kit Short - a red printed circuit board with component labels, mounting holes, and solder pads.

Sold out

0-30V 2mA-3A Adjustable DC Regulated Power Supply DIY Kit Short

Rs 750

0.0001 µF 100pF 0.1nF 101 50V Multilayer ceramic Capacitor - round, orange-coloured ceramic disc capacitors with two metal leads.

0.0001 µF 100pF 0.1nF 101 50V Multilayer ceramic Capacitor

Rs 10

0.001 Uf / 1000 PF Multilayer Ceramic Disc Capacitor (102) - an orange, round disc-shaped electronic component with two vertical metal leads.

0.001 Uf / 1000 PF Multilayer Ceramic Disc Capacitor (102) - a small, round, orange-brown electronic component with two thin metal wire leads.

0.001 Uf / 1000 PF Multilayer Ceramic Disc Capacitor (102)

Rs 10

0.05 mm LCD Screen Separation High Hardness Special Gol Wire Cutting Line For Iphone Samsung Glass Wires Tools - a circular spool of thin cutting wire in clear plastic packaging with text showing specifications and hardness.

0.05 mm LCD Screen Separation High Hardness Special Gol Wire Cutting Line For Iphone Samsung Glass Wires Tools - Gold Wire in a clear plastic bag, showing a white spool with red and black text specifications.

0.05 mm LCD Screen Separation High Hardness Special Gol Wire Cutting Line For Iphone Samsung Glass Wires Tools

Rs 160

0.14MH 140UH Radial Power Inductor Coil – 0.6 Ohm Low Resistance - a black, spool-shaped electronic component with two metal lead wires extending from one end.

Sold out

0.14MH 140UH Radial Power Inductor Coil – 0.6 Ohm Low Resistance

Rs 0

0.1mm PCB Link Jumper Wire Copper Soldering Wire Maintenance Jump Line - shown as two spools of thin, copper-coloured wire on black plastic reels.

0.1mm PCB Link Jumper Wire Copper Soldering Wire Maintenance Jump Line - shown as a spool of thin copper wire wrapped around a black plastic reel.

0.1mm PCB Link Jumper Wire Copper Soldering Wire Maintenance Jump Line

Rs 30

0.1ohm 10W 10W0.1rj 10 Watts 0.1R Resistor - a white rectangular ceramic resistor with a wire lead extending from each end and "10W" printed on its side.

0.1ohm 10W 10W0.1rj 10 Watts 0.1R Resistor - a white rectangular cement resistor with two metal wire leads extending from opposite ends and text printed on the side.

0.1ohm 10W 10W0.1rj 10 Watts 0.1R Resistor

Rs 60

0.1ohm 2W 2W0.1rj 2 Watts 0.1R Resistor - a close-up of a grey cylindrical electronic component with brown, black, silver, and gold bands and two metal leads.

0.1ohm 2W 2W0.1rj 2 Watts 0.1R Resistor - a grey cylindrical electronic component with a wire lead at each end and four coloured bands, isolated against a white background.

0.1ohm 2W 2W0.1rj 2 Watts 0.1R Resistor

Rs 10

0.1ohm 5W 5W0.1rj 5 Watts 0.1R Resistor - two rectangular white ceramic resistors with axial leads, each printed with the text 5W0.1ΩJ.

0.1ohm 5W 5W0.1rj 5 Watts 0.1R Resistor - a rectangular white cement resistor with two metal leads extending from opposite ends, marked with 5W0.1RJ.

0.1ohm 5W 5W0.1rj 5 Watts 0.1R Resistor

Rs 30

0.1uF 100nF 104 50V Multilayer ceramic capacitor - shown as a single yellow disc-shaped capacitor with two long metal wire leads and the text 104 printed.

0.1uF 100nF 104 50V Multilayer ceramic capacitor

Rs 10

0.1uF 100nF 104 50V Multilayer Ceramic Capacitor In Pakistan - 0.1uF 100nF 104 50V Multilayer Ceramic Capacitor, a yellow, triangular-shaped ceramic disc capacitor with two long metal wire leads and the text 104.

0.1uF 100nF 104 50V Multilayer Ceramic Capacitor In Pakistan

Rs 10

0.1uF Capacitor - shown as a black cylindrical electrolytic capacitor with two wire leads and text reading "nichicon" and "1µF 50v".

0.1uF Capacitor

Rs 20

0.2mm 3d Printing Nozzle 3d Printer Accessories MK8 Brass Nozzle - shown as a collection of ten identical gold-colored, threaded brass conical nozzles.

0.2mm 3d Printing Nozzle 3d Printer Accessories MK8 Brass Nozzle - a set of five gold-colored metal nozzles with 0.2 engraved on the sides.

Sold out

0.2mm 3d Printing Nozzle 3d Printer Accessories MK8 Brass Nozzle

Rs 210

0.33 Ohm 5W Ceramic Cement Resistor - a white rectangular block-shaped component with axial wire leads and the text "5W0.33ΩJ" printed on its side.

-25%

0.33 Ohm 5W Ceramic Cement Resistor

Rs 40

Rs 30

0.3mm 3d Printing Nozzle 3d Printer Accessories MK8 Brass Nozzle - two gold-colored, threaded brass nozzles with conical tips.

0.3mm 3d Printing Nozzle 3d Printer Accessories MK8 Brass Nozzle - a collection of ten identical gold-colored brass printer nozzles arranged in rows.

Sold out

0.3mm 3d Printing Nozzle 3d Printer Accessories MK8 Brass Nozzle

Rs 210

0.4mm 3d Printing Nozzle 3d Printer Accessories MK8 Brass Nozzle - shown as a collection of ten identical gold-colored brass nozzles arranged in a grid.

0.4mm 3d Printing Nozzle 3d Printer Accessories MK8 Brass Nozzle - five gold-colored brass nozzles with 0.4 marked on each side.

Sold out

0.4mm 3d Printing Nozzle 3d Printer Accessories MK8 Brass Nozzle

Rs 140

0.5-16P-120mm 0.5 Inch Pitch 16 Pin 120mm Leght Ffc Flexible Flat Cable - a close-up showing the white ribbon cable and its metallic connector pins.

0.5-16P-120mm 0.5 Inch Pitch 16 Pin 120mm Leght Ffc Flexible Flat Cable - a close-up showing two white flat ribbon cables with blue reinforcement tape and exposed gold contact pins.

0.5-16P-120mm 0.5 Inch Pitch 16 Pin 120mm Leght Ffc Flexible Flat Cable

Rs 710

0.5-3mm Mini Drill Chuck Small Electric Drill Bit Collet Micro Twist Drill Chuck Set Power Tools - a gold-colored motor shaft adapter, a knurled cap, five collets, a small hex key, and a set screw.

0.5-3mm Mini Drill Chuck Small Electric Drill Bit Collet Micro Twist Drill Chuck Set Power Tools - five gold-colored brass collets of varying sizes, a drill chuck, and an L-shaped hex key on a white background.

0.5-3mm Mini Drill Chuck Small Electric Drill Bit Collet Micro Twist Drill Chuck Set Power Tools

Rs 410

0.56 inch TM1637 7 Segments LED Display Module for Arduino - the front and back of the black circuit board, with the front displaying 14:56 and four pins on the side.

0.56 inch TM1637 7 Segments LED Display Module for Arduino - a black rectangular circuit board with a four-digit seven-segment display and four pin connectors.

Sold out

0.56 inch TM1637 7 Segments LED Display Module for Arduino

Rs 450

0.5mm 3d Printing Nozzle 3d Printer Accessories MK8 Brass Nozzle - a top-down layout of eight identical gold-colored brass printer nozzles.

0.5mm 3d Printing Nozzle 3d Printer Accessories MK8 Brass Nozzle - five gold-colored brass nozzles arranged on a white background.

Sold out

0.5mm 3d Printing Nozzle 3d Printer Accessories MK8 Brass Nozzle

Rs 210

You've viewed 24 of 6280 products

Load more products