Home ALL Products Arduino CNC Shield V3 A4988 DRV8825 Driver Expansion Board
Ca 1 Digit 7 Segment 0.7 Inch LED Common Anode Display Back to ALL Products Red Momentary Spst Cap Push Button Switch AC 6A 125V 3A 250V Lwus

Sidebar
Arduino CNC Shield V3 A4988 DRV8825 Driver Expansion Board - a red rectangular circuit board with yellow and red pin headers, a blue terminal block, and button.
Arduino CNC Shield V3 A4988 DRV8825 Driver Expansion Board - a red rectangular circuit board with a reset button, header pins, jumper blocks, and a power terminal.
Arduino CNC Shield V3 A4988 DRV8825 Driver Expansion Board - a red rectangular circuit board with yellow and red pin headers, a blue terminal block, and button.
Arduino CNC Shield V3 A4988 DRV8825 Driver Expansion Board - a red rectangular circuit board with a reset button, header pins, jumper blocks, and a power terminal.

Arduino CNC Shield V3 A4988 DRV8825 Driver Expansion Board

Sale price Rs 360
SKU: B238,KRT17,IMP100,Th50A
Log in to use Wishlist
Add to Compare

Frequently Bought Together

Customers building this project usually buy these together.

Arduino CNC Shield V3 A4988 DRV8825 Driver Expansion Board - a red rectangular circuit board with yellow and red pin headers, a blue terminal block, and button.
+
A4988 Stepper Motor Driver - module on a red PCB with a silver heatsink, featuring a small adjustment potentiometer and multiple pin headers.
+
DRV8825 Stepper Motor Driver With Aluminum Heat Sink - a purple circuit board with a black chip, a small potentiometer, and a separate silver aluminum heat sink.
+
Arduino Nano CNC Shield V4 Expansion Board Stepper Motor Driver Board - a red circuit board featuring a power jack, reset button, pin headers, and three yellow motor driver slots.
Arduino Nano CNC Shield V4 Expansion Board Stepper Motor Driver Board - a red circuit board featuring a power jack, reset button, pin headers, and three yellow motor driver slots.
This item: Arduino CNC Shield V3 A4988 DRV8825 Driver Expansion Board -
Sale price Rs 360
A4988 Stepper Motor Driver - module on a red PCB with a silver heatsink, featuring a small adjustment potentiometer and multiple pin headers.
A4988 Stepper Motor Driver -
Sale price Rs 310
DRV8825 Stepper Motor Driver With Aluminum Heat Sink - a purple circuit board with a black chip, a small potentiometer, and a separate silver aluminum heat sink.
DRV8825 Stepper Motor Driver With Aluminum Heat Sink -
Sale price Rs 460
Arduino Nano CNC Shield V4 Expansion Board Stepper Motor Driver Board - a red circuit board featuring a power jack, reset button, pin headers, and three yellow motor driver slots.
Arduino Nano CNC Shield V4 Expansion Board Stepper Motor Driver Board -
Sale price Rs 380
Price for all:
Sale total price Rs 1,510

Pickup available at Digilog Electronics

Usually ready in 2 hours

Arduino CNC Shield V3 A4988 DRV8825 Driver Expansion Board - a red rectangular circuit board with yellow and red pin headers, a blue terminal block, and button.

Arduino CNC Shield V3 A4988 DRV8825 Driver Expansion Board

  • Digilog Electronics

    Pickup available, usually ready in 2 hours

    🏢 Digilog Electronics 13th the RegalStreet,
    Back side of KFC, Near Abubakar Masjid Mall Road
    Lahore
    Pakistan

    +923124002221

    Check this on google map
Arduino CNC Shield V3 A4988 DRV8825 Driver Expansion Board - a red rectangular circuit board with yellow and red pin headers, a blue terminal block, and button.
Arduino CNC Shield V3 A4988 DRV8825 Driver Expansion Board
Sale priceRs 360

Best Online Shopping website for arduino cnc shield v3 a4988 driver board. Here you get arduino cnc shield v3 a4988 driver board in reasonable price in Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Multan, Quetta , Faisalabad and all over Pakistan.

This expansion board as a driver expansion board can be used for engraving machines, 3D printers. It is a total of four slots, can drive four A4988 or DRV8825 stepper motor driver, 4-axis Arduino CNC Shield v3. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very convenient to use.

Specifications:

  1. Latest Arduino CNC Shield Version 3.10
  2. GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
  3. PWM Spindle and direction pins
  4. 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
  5. 2 x End stops for each axis (6 in total)

Features

  1. Coolant enable
  2. Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825, and others) (Not Included)
  3. Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
  4. Compact design.
  5. Stepper Motors can be connected with 4 pin Molex connectors or soldered in place.
  6. Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
  7. Please note that this is an unassembled kit and needs soldering.
  8. * * * Jumpers color may vary depending on the available stock.

NOT INCLUDED:

  • Arduino Uno
  • 1-4 Pololu A4988 compatible stepper drivers

References

FREQUENTLY ASKED QUESTIONS:

What is a CNC router? http://en.wikipedia.org/wiki/CNC_router

What is GRBL? An open-source, embedded, high-performance g-code-parser and CNC milling controller written in optimized C that runs on an Arduino UNO. https://github.com/grbl/grbl

What projects can this be used for? Small CNC routers, DIY Laser Cutters, 3D Printers and almost any project where you need to control a stepper motor with high precision.

Package Includes

  • 1 x CNC Shield for Arduino

You may also like