Sugon 212 2 in 1 Hot Air Rework Station with T12 Soldering Iron

The Sugon 212 pairs a hot air rework gun with a genuine T12 soldering iron in a single 760W unit that runs straight off 220VAC 50Hz mains, so it plugs into a Pakistani socket with no converter. The T12 side is the reason to pick this over a generic 2 in 1 station: the heating element and the tip are one cartridge sitting millimetres from the joint, so the iron reaches working temperature in seconds and recovers almost instantly on a large ground pad instead of stalling the way a long-barrel iron does.

Both tools run from the same panel, each with its own power switch, and the display carries four readouts at once - hot air temperature and airflow on the left, iron set temperature and actual temperature on the right - so you can see the tip catching up rather than guessing. Three memory channels, marked CH1, CH2 and CH3 for each tool, hold the profiles you actually use. A brushless fan drives the hot air, which is noticeably quieter than the brushed diaphragm pumps in budget stations and lasts considerably longer. Automatic sleep, adjustable from 0 to 30 minutes, drops the iron when you set it in the stand so tips are not cooked through a tea break.

Key Features

• 🔥 2 in 1 station - hot air rework gun and T12 soldering iron integrated in one 760W unit.
• ⚡ Genuine T12 cartridge iron - heater and tip in one body for fast heat-up and quick thermal recovery on heavy joints.
• 🌡️ 200 to 500 degree C range - covers leaded and lead-free work, from fine SMD to heavy ground planes.
• 🖥️ Four-value display - hot air temperature and airflow alongside the iron set temperature and actual temperature, so you can watch the tip recover.
• 🔢 Three memory channels per tool - CH1, CH2 and CH3 store your temperature and airflow combinations for one-press recall.
• 🌀 Brushless fan - quieter running and a longer service life than the brushed pumps used in cheaper hot air stations.
• 🔌 Independent power switches - run the iron alone without spinning up the hot air side, or the reverse.
• 💤 Automatic sleep, 0 to 30 minutes - the iron powers down on its own via the stand cable, which protects the tip and saves power.
• 🎯 Temperature calibration - trim the reading against a reference so the display matches the real tip temperature.
• 🔁 Unit conversion and audible alerts - switch between Celsius and Fahrenheit, with sound signals for status changes.
• 🇵🇰 220VAC 50Hz input - matches Pakistani mains directly, protected by a 5A fuse.

What Is in the Box

• Sugon 212 station unit
• T12 soldering iron handle
• T12 heater cartridge
• Hot air handle
• Soldering iron stand
• Sleep mode connection cable
• User manual

Specifications

• Brand: SUGON
• Model: 212 (2in1 rework station)
• Type: 2 in 1 hot air rework station with T12 soldering iron
• Input: 220VAC, 50Hz
• Maximum power: 760W
• Fuse: 5A
• Temperature range: 200 to 500 degrees C
• Iron type: T12 cartridge (integrated heater and tip)
• Air source: brushless fan
• Display: digital, showing set temperature and actual temperature plus airflow
• Control: temperature and airflow set by buttons
• Memory presets: 3 channels (CH1, CH2, CH3) per tool
• Power switches: separate for hot air gun and soldering iron
• Sleep mode: automatic, adjustable 0 to 30 minutes
• Calibration: temperature calibration supported
• Temperature units: Celsius and Fahrenheit switchable
• Alerts: audible sound signals
• Safety: CE

Who It Is For

Mobile and laptop repair technicians who spend the day alternating between hot air and iron work, board-level repair shops that need quick thermal recovery on shielding cans and ground planes, and lab or workshop benches where a single unit has to replace two. The T12 cartridge system also means tip changes are quick and replacements are easy to source, which matters if several people share the station.

Delivery

The Sugon 212 2 in 1 hot air rework and T12 soldering station is available in Pakistan from Digilog.pk with nationwide delivery to Karachi, Lahore, Islamabad, Rawalpindi, Faisalabad, Multan, Peshawar and Quetta. Order online, or contact us if you want help choosing between this and a single-function hot air station.