IRLZ44N logic level MOSFET TO-220 front view with gate, drain and source leads
IRLZ44N N-channel logic level MOSFET in TO-220 package
Sold out
IRLZ44N logic level MOSFET TO-220 front view with gate, drain and source leads
IRLZ44N N-channel logic level MOSFET in TO-220 package

IRLZ44N N-Channel Logic Level MOSFET – 55V 47A TO-220

Sale price Rs 150
Log in to use Wishlist
Add to Compare

Notify me if back in stock

Enter your email address to be notified if the product becomes available again.

📝 Product Description

The IRLZ44N is the logic-level N-channel MOSFET used in most Arduino, ESP32 and Raspberry Pi tutorials for switching LED strips, DC motors, solenoids, pumps and heaters. Its gate fully turns on from a 5 V microcontroller pin, with an on-resistance of only 25 mΩ at 5 V, so it runs cool without a separate gate driver.

Rated at 55 V and 47 A in a standard TO-220 package, the IRLZ44N handles far more current than a typical hobby project needs, and the metal tab bolts to a heat sink for heavy loads. It is the stronger, lower-resistance sibling of the IRLZ34N.

🔧 Key Features

  • ⚡ True logic level: fully on at 5 V gate (25 mΩ), still 35 mΩ at 4 V
  • 🔋 High current: 47 A continuous, 160 A pulsed
  • 🔧 Direct drive: switch loads straight from Arduino, ESP32 or STM32 pins with PWM
  • 📏 TO-220AB package: breadboard and heat-sink friendly
  • ✅ Rugged: 110 W dissipation, junction rating up to 175°C
  • 📦 Size & weight: about 10 × 4.5 × 29 mm with leads; ships in a small pack weighing about 5 g

📋 Technical Specifications

Parameter Value
Transistor type N-channel MOSFET, logic level
Package TO-220AB
Drain-source voltage (Vds) 55 V
Gate-source voltage (Vgs, max) ±16 V
Gate threshold voltage 1.0 V to 2.0 V
Continuous drain current 47 A at 25°C case, 33 A at 100°C
Pulsed drain current 160 A
On-resistance RDS(on) 22 mΩ at 10 V, 25 mΩ at 5 V, 35 mΩ at 4 V gate
Total gate charge (Qg) 48 nC
Power dissipation 110 W
Junction temperature -55°C to +175°C
Product size (L × W × H) approx. 10 × 4.5 × 29 mm including leads
Net weight approx. 2 g
Package size (L × W × H) approx. 6 × 4 × 1 cm
Shipping weight approx. 5 g

📍 Pinout (front view, leads down)

  1. Gate (G): connect to the microcontroller pin through a 100–220 Ω resistor, with a 10 kΩ pull-down to ground
  2. Drain (D): connects to the load (also the metal tab)
  3. Source (S): ground

🌍 Applications

  • 💡 12 V LED strip dimming with Arduino PWM
  • 🎛 DC motor and fan speed control
  • 🔌 Solenoid, relay coil, pump and heater switching
  • 🔋 Battery load switching and low-voltage power circuits

📦 Package Includes

  • 1 × IRLZ44N N-channel logic-level MOSFET (TO-220AB)