On Demand Fluke 789 Process Meter The Ultimate Loop Calibration Multimeter+ Fast Shipping
Fluke 789 ProcessMeter the Ultimate Loop Calibration Multimeter+ Fast Shipping
The F789 Fluke Process Multimeter is the first process multimeter to combine a digital multimeter and a loop calibrator, doubling the capabilities of process technicians. Fluke has now introduced a new and better model, the Fluke 789 Loop Calibration Multimeter. The Fluke 789 has a 24V loop power supply and does not require separate carrying of loop power for offline transmitter testing; the built-in optional 250 Ω HART loop resistor eliminates the need to carry the load resistor alone. Fluke 789 lets you carry less and finish more.
Features:
24 V loop power supply
Double display large screen
Enhanced backlight, 2-level brightness adjustable
1200 Ohm drive capability with mA output
HART mode with loop power supply, built-in 250 ohm resistor
The 0% and 100% buttons toggle between the 4 and 20 mA outputs for quick full-scale inspection
Battery compartment door for easy battery replacement
Fluke 789 contains all features that the Fluke 787 has
Precision 1000 V, 440 mA True RMS Digital Multimeter
0.1% DC Voltage Accuracy
0.05% DC Current Accuracy
Up to 20 kHz frequency measurement
Min/Max/Avg/Contact Hold/Relative Mode
Diode test function and on-off buzzer
Simultaneous reading of mA readings and percentage readings
20 mA DC Current Output / Loop Calibrator / Simulator
Manual stepping (25%, coarse adjustment, fine adjustment), automatic stepping and automatic ramping
Battery compartment door for easy battery replacement
Current measurement |
Range: 0-1 A AC or DC
Resolution: 1 mA
Accuracy: 0.2% + 2 LSD (DC)
The
Range: 0-30 mA
Resolution: 0.001 mA
Accuracy: 0.05% + 2 least significant digits
|
|||
Output current |
Range: 0-20 mA or 4-20 mA
Resolution: 0.05% full scale
Drive capability: 24 V or 1200 Ω @ 20 mA
|
|||
Frequency |
To 19.999 kHz, 0.005% + 1 least significant bit |
|||
Continuity |
Beep at impedance <100 Ω
|
|
||
Voltage measurement |
Range: 0-1000 V AC (true rms) or DC
Resolution: 0.1 mV to 1.0 V
Accuracy: 0.1% reading + 1 least significant bit (VDC)
|
|
||
Resistance measurement |
Up to 40 MΩ, 0.2% + 1 least significant bit
|
|||
Diode test |
2.0 V display diode voltage drop
|
|||
Shows the percentage of current and full scale |
Yes |
|||
Automatic stepping, automatic slope |
Yes |
Environmental parameters: |
|||
Operating temperature |
|
||
Storage temperature |
-40 C to 60 C
|
||
Humidity (non-condensing) |
95% to 30 C
75% to 40 C
45% to 50 C
35% to 55 C
|
||
Temperature Coefficient |
0.05 x (Nominal Accuracy) /oC (When Temperature < 18 C or > 28 C)
|
Safety technical parameters |
|||
Electrical Safety |
|
||
Overvoltage category |
IEC 1010-1 CAT III 1000 V
IEC 1010-1 CAT IV 600 V
|
||
Maximum voltage |
1000 V RMS
|
Mechanical and general parameters |
|||
Dimensions |
50 x 100 x 203 mm |
||
Weight |
600 g |
||
Batteries |
4 AA alkaline batteries
|
||
warranty period |
3 years |
||
Battery Life |
140 hours, typical value (measurement); 10 hours, typical value (output 20 mA)
Vibration and vibration
|
||
Vibration and vibration |
Random, 2 g, 5-500 Hz
1 meter drop test
|
Model Name |
Description |
Fluke 789 |
Process Multimeter
AC72 alligator clip
Four AA Models 1.5 V Alkaline Batteries (Installed) Not included package
TL71 Safety Design Test Lead Set
User Manual and Quick Reference Guide
|