71.4V 3A 6 Lamp E Bike Charger in Pakistan
Pickup available at Digilog Electronics
Usually ready in 2 hours
71.4V 3A 6 Lamp E Bike Charger in Pakistan
71.4V 3A 6 Lamp E-Bike Battery Charger
Electrical Specifications:
| Parameter | Value |
|---|---|
| Output Voltage | 71.4V DC |
| Output Current | 3A (constant current) |
| Compatible Battery | 60V Lithium-ion (17S configuration) |
| Input Voltage | 220–240V AC, 50/60Hz |
| Charging Curve | 3-stage: Constant Current (CC) → Constant Voltage (CV) → Trickle/Float |
| Connector Type | Standard female e-bike charging port (specify: XLR/GX16/Anderson/T-plug as per your unit) |
| Power Cord | 2-pin AC input cable, ~1.5m |
Charge Status Indicator:
6-LED display showing real-time charge level in 5 stages (25% / 50% / 75% / 100%, plus power/standby indicator), giving a quick visual read on battery state throughout the charge cycle.
Protection Circuitry:
- Over-voltage protection (OVP)
- Over-current protection (OCP)
- Short-circuit protection (SCP)
- Over-temperature protection (OTP)
- Reverse polarity protection
Design & Build:
- Housing: Flame-retardant ABS/PC casing
- Cooling: Passive ventilation with internal heat-sink for thermal dissipation (~214W output)
- Efficiency: >85% typical conversion efficiency (adjust if you have actual test data)
Compatibility:
Designed for 60V lithium-ion battery packs (17S) commonly used in mid-power e-bikes and e-scooters requiring a 71.4V max-charge termination point.
Package Contents:
- 1x 71.4V 3A E-Bike Charger
Similar Products
2s 8A 7.4V 8.4V Lithium LiPo Cell Li-ion BMS Battery 18650 Protection Board Tool
18650 Battery Holder 3x5 Cell 18650 Batteries Spacer Holders Radiating Plastic Holder Bracket For DIY Battery Pack
13S 35A 48V Li-ion Lithium 18650 BMS PCB Pcm Battery Pack Balance Integrated Circuits Board For Arduino
12.6V 500mA 3s 3 Cell Battery Charger Lithium Ion 18650 3 Cell Charger
