54.6V 3A 6 Lamp E Bike Charger in Pakistan
Pickup available at Digilog Electronics
Usually ready in 2 hours
54.6V 3A 6 Lamp E Bike Charger in Pakistan
54.6V 3A E-Bike Charger
Electrical Specifications:
| Parameter | Value |
|---|---|
| Output Voltage | 54.6V DC |
| Output Current | 3A (constant current) |
| Compatible Battery | 48V Lithium-ion (13S configuration) |
| Input Voltage | 220–240V AC, 50/60Hz |
| Charging Curve | 3-stage: Constant Current (CC) → Constant Voltage (CV) → Trickle/Float |
| Connector Type | Standard female e-bike charging port (specify: XLR/GX16/Anderson if applicable) |
| Power Cord | 2-pin AC input cable, ~1.5m |
Charge Status Indicator:
6-LED display showing real-time charge level in 5 stages (25% / 50% / 75% / 100%, plus power/standby indicator), allowing accurate monitoring of battery state without disconnecting.
Protection Circuitry:
- Over-voltage protection (OVP)
- Over-current protection (OCP)
- Short-circuit protection (SCP)
- Over-temperature protection (OTP)
- Reverse polarity protection
Design & Build:
- Housing: Flame-retardant ABS/PC casing
- Cooling: Passive ventilation with internal heat-sink for thermal dissipation during sustained charge cycles
- Efficiency: >85% typical conversion efficiency (adjust if you have actual test data)
Compatibility:
Suitable for 48V lithium-ion battery packs commonly used in e-bikes, e-scooters, and light electric vehicles requiring a 54.6V max-charge termination point (standard for 13S Li-ion/NMC packs).
Package Inlcudes:
- 1x 54.6V 3A E-Bike Charger
Similar Products
2s 8A 7.4V 8.4V Lithium LiPo Cell Li-ion BMS Battery 18650 Protection Board Tool
18650 Battery Holder 3x5 Cell 18650 Batteries Spacer Holders Radiating Plastic Holder Bracket For DIY Battery Pack
13S 35A 48V Li-ion Lithium 18650 BMS PCB Pcm Battery Pack Balance Integrated Circuits Board For Arduino
12.6V 500mA 3s 3 Cell Battery Charger Lithium Ion 18650 3 Cell Charger
