47 × 30 × 10mm Li-Polymer battery with JST connector and silver-tone and black 3-pin mini SPDT slide switch
47 × 30 × 10mm Li-Polymer battery with JST connector and silver-tone and black 3-pin mini SPDT slide switch — kit photo
47 × 30 × 10mm Li-Polymer battery with JST connector and silver-tone and black 3-pin mini SPDT slide switch
47 × 30 × 10mm Li-Polymer battery with JST connector and silver-tone and black 3-pin mini SPDT slide switch — kit photo

3.7V 1000mAh Li-Polymer Battery + SPDT Switch Kit

Sale price Rs 310
Log in to use Wishlist
Add to Compare

Pickup available at Digilog Electronics

Usually ready in 2 hours

47 × 30 × 10mm Li-Polymer battery with JST connector and silver-tone and black 3-pin mini SPDT slide switch

3.7V 1000mAh Li-Polymer Battery + SPDT Switch Kit

  • Digilog Electronics

    Pickup available, usually ready in 2 hours

    🏢 Digilog Electronics 13th the RegalStreet,
    Back side of KFC, Near Abubakar Masjid Mall Road
    Lahore
    Pakistan

    +923124002221

    Check this on google map

The Li-Polymer Battery + SPDT Switch Kit pairs a rechargeable 3.7V 1000mAh battery with a 3-pin 8.5mm mini vertical slide switch. You can wire the switch to control battery power in a suitable low-power circuit.

What's included

Key features

  • Rechargeable battery: The Li-Polymer battery has a nominal voltage of 3.7V and a capacity of 1000mAh.
  • Compact dimensions: The battery measures 47 × 30 × 10mm.
  • JST connector: The battery has a standard JST connector compatible with mikromedia boards.
  • SPDT switching: The 3-pin slide switch can control power or select between 2 input signals.

Applications

  • Portable low-power electronics
  • Wearable project power control
  • Wireless sensor node power switching

Frequently asked questions

Can I use the switch to turn battery power on and off?

Yes, when wired into a suitable low-power circuit within the switch's electrical rating. The parts require wiring to work together.

Can the slide switch charge the battery?

No, the switch only changes electrical connections. Charging requires a suitable Li-Polymer battery charger, which is not included.

What comes with this kit?

You receive 1 rechargeable 3.7V 1000mAh Li-Polymer battery and 1 mini vertical SPDT slide switch. A development board, breadboard, connecting wires and charging cable are not included.