1.3 inch blue OLED display module alongside an HW-466AB ESP32-C3 Super Mini development board
1.3 inch blue OLED display module alongside an HW-466AB ESP32-C3 Super Mini development board — kit photo
1.3 inch blue OLED display module alongside an HW-466AB ESP32-C3 Super Mini development board
1.3 inch blue OLED display module alongside an HW-466AB ESP32-C3 Super Mini development board — kit photo

1.3 Inch SSD1106 OLED + ESP32-C3 Super Mini Kit

Sale price Rs 1,210
Log in to use Wishlist
Add to Compare

Pickup available at Digilog Electronics

Usually ready in 2 hours

1.3 inch blue OLED display module alongside an HW-466AB ESP32-C3 Super Mini development board

1.3 Inch SSD1106 OLED + ESP32-C3 Super Mini Kit

  • Digilog Electronics

    Pickup available, usually ready in 2 hours

    🏢 Digilog Electronics 13th the RegalStreet,
    Back side of KFC, Near Abubakar Masjid Mall Road
    Lahore
    Pakistan

    +923124002221

    Check this on google map

The OLED + ESP32-C3 Super Mini Kit pairs a 1.3 inch 128x64 blue OLED display with an HW-466AB ESP32-C3 development board. Use the board to control the display over I2C and show information in connected projects.

What's included

Key features

  • Blue OLED display: The 1.3 inch SSD1106 display provides 128x64 resolution with blue text.
  • Display power: The OLED module accepts 3.3V or 5V input.
  • Wireless connectivity: The ESP32-C3 board supports 2.4GHz Wi-Fi and Bluetooth LE 5.0.
  • Development options: The board supports development with ESP-IDF, MicroPython and Arduino.

Applications

  • IoT status displays
  • Smart home information panels
  • Sensor network readouts

Frequently asked questions

Can the ESP32-C3 board control this OLED?

Yes, you can connect the OLED to the ESP32-C3 using I2C. You will need suitable wiring and display software.

What is included, and what else do I need?

You receive 1 OLED display module and 1 ESP32-C3 development board. Connecting wires, a USB cable and a power supply are not included.

Can I use USB and external power at the same time?

No, do not connect USB and external power simultaneously. For external power to the development board, connect positive to the 5V pin and negative to GND.