Custom Kits

Custom Kits
CUSTOM_KITS.init()    Open for Orders

We Build the Kit
You Imagine

Share your demand — we engineer, source, and assemble electronics kits built exactly to your specifications. Quantity orders only. Minimum 10 units per kit.

WhatsApp Us Email Us
⚠️

Quantity Orders Only — Minimum 10 units per kit. We do not process orders below this threshold. If your requirement starts at 1 pc, plan ahead: we accept pre-orders so you can consolidate demand before placing. Contact us to discuss.

How it works

From Your Idea to a Built Kit

A simple four-step process — share your demand, we take it from there.

STEP_01 📋
Share Your Demand

Tell us what you need — component list, purpose, quantity, any customizations. WhatsApp or email, either works.

STEP_02 💬
We Review & Quote

Our team reviews your requirements, sources components, and sends you a detailed quote with timeline.

STEP_03 ✅
Confirm 10+ Units

Minimum 10 units per kit type. Confirm your order and quantity — we proceed on confirmation.

STEP_04 📦
We Build & Deliver

Your customized kits are assembled, tested, and delivered ready to use.

Sample Kits — For Reference

What We Can Build

These are examples of kit types we've built. Your kit doesn't have to match — describe what you need and we'll build it.

🔌 Reference
General / Learning
Starter Electronics Kit

Everything a beginner needs to start experimenting with electronics — breadboard, jumper wires, resistors, LEDs, capacitors, and basic components.

Breadboard LEDs Resistors Jumper Wires Capacitors
🔧 Reference
Tools / Workbench
Soldering Kit

Complete soldering setup with iron, solder wire, flux, desoldering pump, PCB holder, and safety tools — ideal for lab or classroom use.

Soldering Iron Solder Wire Flux Desoldering Pump PCB Stand
🤖 Dev Kit + Coding
Development / Microcontroller
Arduino Dev Kit

Customizable Arduino-based development kits. Specify your board (Uno, Nano, Mega), sensors, and shields. Coding examples available at extra cost.

Arduino Uno / Nano Sensors Shields USB Cable
📡 Dev Kit + Coding
Development / Wi-Fi + BT
ESP32 Kit

ESP32-based IoT kits with Wi-Fi and Bluetooth. Customized with your choice of sensors and peripherals. Programming examples can be included for extra charge.

ESP32 Board Wi-Fi / BT Sensors Breakout Boards
📲 Dev Kit + Coding
Development / RFID
RFID Kit

Complete RFID reader/writer kits with cards and tags. Integrate with Arduino or ESP32. Functional code examples available at extra charge per kit.

RFID Reader RFID Cards RFID Tags Wiring Guide
Coding Examples Add-on

Need Working Code With Your Dev Kit?

For development kits like Arduino, ESP32, and RFID — we can include functional coding examples and project files ready to upload. This is an optional add-on and will be charged separately per kit.

💡 Mention this when sharing your demand — we'll include it in the quote.
Arduino →
ESP32 →
RFID →
Component Reference

Common Kit Components

Use this list as a guide when writing your kit demand. Reference the exact component name, mention specs (voltage, resistance, etc.), and state quantity per kit.

Basic / Passive Components
LED 5mm
~10 pcs / kit
Specify color — Red, Green, Blue, Yellow, White
Resistor
~20 pcs / kit
Specify Ω value & wattage (e.g. 10kΩ 1/4W)
Capacitor
~10 pcs / kit
Specify capacitance & voltage rating
Push Button
~5 pcs / kit
2-pin or 4-pin momentary switch
Potentiometer
~2 pcs / kit
Specify resistance (e.g. 10kΩ linear)
Transistor
~5 pcs / kit
Specify type: NPN (BC547) or PNP
Tools & Essentials
Breadboard
1 pc / kit
830 tie-point full-size or 400 mini
Jumper Wires
1 set / kit
Specify M-M, M-F, F-F or mixed set
USB Cable
1 pc / kit
Specify type: USB-A to Micro-B or Type-C
Soldering Iron
1 pc / kit
25W–60W adjustable temperature
Solder Wire
1 roll / kit
60/40 tin-lead or lead-free, 0.8mm
Multimeter
1 pc / kit
Digital, with test probes
Development Boards & Modules
Arduino Uno
1 pc / kit
Rev 3 — ATmega328P, 14 digital I/O
Arduino Nano
1 pc / kit
Compact form-factor, breadboard-friendly
ESP32 DevKit
1 pc / kit
Wi-Fi + Bluetooth, ESP32-WROOM-32
RFID RC522
1 pc / kit
With RFID card + key tag included
DHT11 Sensor
1–2 pcs / kit
Temperature & Humidity, 3-pin module
HC-SR04
1 pc / kit
Ultrasonic distance sensor, 4-pin
Instructions Guide

How to Submit Your Kit Demand

Follow these steps to get an accurate quote quickly. The more detail you share, the faster we can respond.

📋
How to Fill Your Kit List
Write a clear, specific component list
1
Name each component exactly
Write "10kΩ 1/4W Resistor" — not just "resistor." Exact names help us source correctly and avoid substitutions.
2
State quantity per kit
List how many of each component goes inside one single kit. E.g., "10× LED, 20× Resistor, 1× Breadboard."
3
State total number of kits
Tell us how many kits you need in total. Minimum is 10 kits per kit type — e.g., "I need 25 Starter Kits."
4
Attach reference images or links
Share photos, datasheets, or links for any components you're unsure how to name. We'll identify them for you.
5
Group by category
Organize your list — passives first, then ICs, connectors, modules, and tools. Makes it easier for both sides.
The more specific your list, the faster and more accurate our quote. Vague lists delay the process.
🔧
Kit Building Tips
Make your kit better from the start
✓
Specify electrical ratings
For capacitors, resistors, and power components — always include voltage rating, wattage, or tolerance. E.g., "100µF 25V capacitor."
✓
Mention the exact board model
For dev kits: say "Arduino Uno R3" or "ESP32-WROOM-32 DevKit v1" — not just "Arduino" or "ESP." Different models have different pinouts.
✓
Note sensor interface type
Mention if a sensor uses I2C, SPI, UART, or analog. This helps us verify compatibility with your board.
✓
Think about packaging needs
Want zip bags, foam inserts, custom label printing, or a branded box? Tell us — we can accommodate custom packaging.
✓
Request coding examples early
For dev kits, coding examples are optional but must be requested upfront. This is a separate charge included in your quote.
Custom packaging and label printing available — ask about it when you send your demand.
📦
How to Place Your Order
End-to-end process from demand to delivery
1
Prepare your kit list
Write out your component list using the tips above — names, specs, quantities per kit, and total kit count.
2
Contact us on WhatsApp or Email
Send your list to WhatsApp +92 312 400 2221 or email info@digilog.pk. WhatsApp gets a faster response.
3
Receive our quote
We review your list, confirm component availability, and send back a detailed quote — usually within 24 hours.
4
Confirm — minimum 10 units
Approve the quote and confirm your quantity. We do not process orders below 10 units per kit type.
5
Advance payment & we build
After payment confirmation we source, assemble, test, and deliver your custom kits to your door.
WhatsApp gets you a response usually within a few hours — fastest way to get your order started.
Get in touch

Share Your
Demand

Tell us your kit idea, component list, quantity, and any special requirements. We respond fast — usually within a few hours on WhatsApp.

What to include in your message

Help us quote you faster — include as much detail as possible.

Kit type or purpose (e.g. "soldering kit for a training lab")
Component list or reference (what should be inside the kit)
Quantity required — minimum 10 pcs per kit type
Any custom branding, labeling, or packaging needs
For dev kits: whether you need coding examples (extra charge)
Delivery timeline or deadline, if any
Start on WhatsApp