ESP32 ESP-wroom-32 - shown from the front with a metal shield and from the back displaying the printed pinout labels on a black circuit board.

ESP32 ESP-wroom-32

Sale price Rs 910
SKU: B130,krt46,L6,Th3
Log in to use Wishlist
Add to Compare

Pickup available at Digilog Electronics

Usually ready in 2 hours

ESP32 ESP-wroom-32 - shown from the front with a metal shield and from the back displaying the printed pinout labels on a black circuit board.

ESP32 ESP-wroom-32

  • Digilog Electronics

    Pickup available, usually ready in 2 hours

    🏢 Digilog Electronics 13th the RegalStreet,
    Back side of KFC, Near Abubakar Masjid Mall Road
    Lahore
    Pakistan

    +923124002221

    Check this on google map

The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Now get ready to take your bite-sized WiFi capabilities to the next level with the ESP32 Development Board!ESP32-WROOM-32 is SMD module which you can integrate to your own PCB design. Espressif has taken care of all certifications and regulations so you can use it as is without certification hassles.

Specifications:

  1. CPU and Memory
  2. Xtensa� Dual-Core 32-bit LX6 microprocessors, up to 600 DMIPS
  3. 448 KByte ROM
  4. 520 KByte SRAM
  5. 16 KByte SRAM in RTC
  6. QSPI Flash/SRAM, up to 4 x 16 MBytes
  7. Power supply: 2.2 V to 3.6 V

Clocks and Timers

  1. Internal 8 MHz oscillators with calibration
  2. Internal RC oscillator with calibration
  3. External 2 MHz to 40 MHz crystal oscillator
  4. External 32 kHz crystal oscillator for RTC with calibration
  5. Two timer groups, including 2 x 64-bit timers and 1 x main watchdog in each group
  6. RTC timer with sub-second accuracy
  7. RTC watchdog

Advanced Peripheral Interfaces

  1. 12-bit SAR ADC up to 18 channels
  2. 2 � 8-bit D/A converters
  3. 10 � touch sensors
  4. Temperature sensor
  5. 4 � SPI
  6. �2 � I2S
  7. �2 � I2C
  8. 3 � UART
  9. 1 host (SD/eMMC/SDIO)
  10. 1 slave (SDIO/SPI)
  11. Ethernet MAC interface with dedicated DMA and IEEE 1588 support
  12. CAN 2.0
  13. IR (TX/RX)
  14. Motor PWM
  15. LED PWM up to 16 channels
  16. Hall sensor
  17. Ultra-low-power analog pre-amplifier

Development Support

  1. SDK Firmware for fast on-line programming
  2. Open source toolchains based on GCC
  3. Operating Temperature Range: -40 � C to + 85 � C
  4. Package size: 18mm x 25mm x 3mm

Documents

Package Includes:

1 x�ESP32 ESP-WROOM-32

Frequently Bought Together

USB 2.0 To TTL UART Serial Converter CP2102 - a black circuit board with a USB connector, a six-pin header, and printed labels for pins and power. USB 2.0 To TTL UART Serial Converter CP2102 - a black circuit board with a USB connector on one end and six gold-plated pins on the other.
Log in to use Wishlist
Add to Compare

USB 2.0 To TTL UART Serial Converter CP2102

Sale priceRs 560
USB 3.1 Type C Connector - shown as a green circuit board with a USB-C port, four labeled solder pads, and 12mm by 15mm dimension markings. USB 3.1 Type C Connector - a green printed circuit board with a gold-plated connector edge and multiple circular and oval solder pads.
Log in to use Wishlist
Add to Compare

USB 3.1 Type C Connector

Sale priceRs 90
Mega 2560 Pro Mini Embed CH340G Atmega 2560-16A With Male Pin Headers - a black rectangular microcontroller board with a red reset button, USB port, and loose male pin header strips. Mega 2560 Pro Mini Embed CH340G Atmega 2560-16A With Male Pin Headers - a black rectangular microcontroller board with rows of pin header holes and printed white labels.
Log in to use Wishlist
Add to Compare

Mega 2560 Pro Mini Embed CH340G Atmega 2560-16A With Male Pin Headers

Sale priceRs 2,980
1N5822 Schottky Diode - a black cylindrical component with a silver cathode band and bent wire leads, shown with its schematic symbol below. 1N5822 Schottky Diode - a black cylindrical electronic component with two silver metal leads extending from opposite ends.
Log in to use Wishlist
Add to Compare

1N5822 Schottky Diode

Sale priceRs 20
FT232RL 3.3V 5.5V FTDI USB To TTL Serial Adapter Module For Arduino Mini Port - a red circuit board featuring a mini-USB port, a black chip, and a row of pin headers. FT232RL 3.3V 5.5V FTDI USB To TTL Serial Adapter Module For Arduino Mini Port - connected via a rainbow ribbon cable to a blue Arduino Pro Mini board, shown on a white background.
Log in to use Wishlist
Add to Compare

FT232RL 3.3V 5.5V FTDI USB To TTL Serial Adapter Module For Arduino Mini Port

Sale priceRs 290
AMS1117 3.3V Regulator 3V3 Regulator - a black SOT-223 surface-mount electronic component with three metal pins and a large heat sink tab, labeled "AMS1117 3.3 0924".
Log in to use Wishlist
Add to Compare

AMS1117 3.3V Regulator 3V3 Regulator

Sale priceRs 20