{"product_id":"yihua-948d-iii-desoldering-station-in-pakistan","title":"YIHUA 948D III Desoldering Station with 110W Soldering Iron and Vacuum Pump","description":"\u003cp\u003e\u003cstrong\u003eThe YIHUA 948D III is a 2-in-1 desoldering station\u003c\/strong\u003e that combines a vacuum desoldering gun and a 110W soldering iron in one PID-controlled unit. It removes through-hole components by melting the solder joint and sucking the solder out of the hole with a built-in vacuum pump (0.05 MPa), so parts lift out cleanly without damaging pads. In Pakistan it is often called a desoldering machine or solder sucker machine.\u003c\/p\u003e\n\u003cp\u003eIt is built for repair benches that pull DIP ICs, connectors, relays, transformers and power components from UPS, inverter, TV and industrial control boards, then solder the replacement part with the same station.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🔧 \u003cstrong\u003eTwo tools, one station\u003c\/strong\u003e – desoldering gun and soldering iron work side by side, so you remove and re-solder without changing equipment.\u003c\/li\u003e\n\u003cli\u003e⚡ \u003cstrong\u003eBuilt-in vacuum pump\u003c\/strong\u003e – 0.05 MPa suction clears through-holes in one pull, no hand solder sucker or wick needed.\u003c\/li\u003e\n\u003cli\u003e🌡️ \u003cstrong\u003ePID temperature control\u003c\/strong\u003e – the station corrects temperature every 20 ms for fast heat-up and quick recovery on heavy joints.\u003c\/li\u003e\n\u003cli\u003e🔥 \u003cstrong\u003e110W EVO soldering iron\u003c\/strong\u003e – 200–480 °C range for everything from fine work to large ground planes.\u003c\/li\u003e\n\u003cli\u003e📏 \u003cstrong\u003eThree desoldering nozzles\u003c\/strong\u003e – 0.8 mm, 1.2 mm and 2.0 mm to match lead and pad size.\u003c\/li\u003e\n\u003cli\u003e🔋 \u003cstrong\u003e10-minute sleep and auto shutdown\u003c\/strong\u003e – drops temperature when idle to extend element and nozzle life; sleep mode can be turned off.\u003c\/li\u003e\n\u003cli\u003e✅ \u003cstrong\u003eDigital temperature calibration\u003c\/strong\u003e – correct the reading against a tip thermometer.\u003c\/li\u003e\n\u003cli\u003e🧹 \u003cstrong\u003eEasy cleaning\u003c\/strong\u003e – removable solder residue chamber with replaceable ceramic filters and filter springs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eYIHUA 948D III Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eYIHUA 948D III\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e2-in-1 desoldering and soldering station\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSoldering iron\u003c\/td\u003e\n\u003ctd\u003e110W EVO heating element (K917D handle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSoldering iron temperature\u003c\/td\u003e\n\u003ctd\u003e200–480 °C (392–896 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesoldering gun\u003c\/td\u003e\n\u003ctd\u003e948DG EVO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesoldering gun temperature\u003c\/td\u003e\n\u003ctd\u003e380–480 °C (716–896 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVacuum pressure\u003c\/td\u003e\n\u003ctd\u003e0.05 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature control\u003c\/td\u003e\n\u003ctd\u003ePID, compensation every 20 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eDual-reading LCD (soldering and desoldering)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesoldering nozzles\u003c\/td\u003e\n\u003ctd\u003e0.8 mm, 1.2 mm, 2.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTip-to-ground resistance\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 2 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSleep \/ shutdown\u003c\/td\u003e\n\u003ctd\u003e10-minute sleep mode, automatic shutdown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating ambient temperature\u003c\/td\u003e\n\u003ctd\u003e0–40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStation dimensions\u003c\/td\u003e\n\u003ctd\u003eapprox. 248 × 150 × 126 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eDesoldering Station vs Manual Solder Sucker\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eYIHUA 948D III station\u003c\/th\u003e\n\u003cth\u003eManual solder sucker \/ wick\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat and suction\u003c\/td\u003e\n\u003ctd\u003eHeated nozzle and vacuum in one tool\u003c\/td\u003e\n\u003ctd\u003eIron in one hand, pump in the other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuction\u003c\/td\u003e\n\u003ctd\u003eContinuous electric vacuum, 0.05 MPa\u003c\/td\u003e\n\u003ctd\u003eSingle spring-loaded stroke\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMulti-pin parts (ICs, connectors)\u003c\/td\u003e\n\u003ctd\u003eEach pin cleared in one pull\u003c\/td\u003e\n\u003ctd\u003eOften needs several attempts per pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePad damage risk\u003c\/td\u003e\n\u003ctd\u003eLow, temperature controlled\u003c\/td\u003e\n\u003ctd\u003eHigher, from repeated heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest for\u003c\/td\u003e\n\u003ctd\u003eDaily repair work and production rework\u003c\/td\u003e\n\u003ctd\u003eOccasional hobby use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eNeed to remove SMD parts with hot air instead? See the \u003ca href=\"\/products\/yihua-995d-plus-2-in-1-hot-air-rework-soldering-station-in-pakistan\"\u003eYIHUA 995D+ hot air rework and soldering station\u003c\/a\u003e. For light, occasional desoldering, the \u003ca href=\"\/products\/yihua-929d-v-30w-electric-desoldering-pump-iron-in-pakistan\"\u003eYIHUA 929D-V electric desoldering pump iron\u003c\/a\u003e is a lower-cost option.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e948D III station unit\u003c\/li\u003e\n\u003cli\u003e948DG EVO desoldering gun\u003c\/li\u003e\n\u003cli\u003eK917D soldering iron\u003c\/li\u003e\n\u003cli\u003e3 desoldering nozzles (0.8 \/ 1.2 \/ 2.0 mm)\u003c\/li\u003e\n\u003cli\u003eMetal iron holder\u003c\/li\u003e\n\u003cli\u003eCleaning pin set\u003c\/li\u003e\n\u003cli\u003eSolder residue chamber and vacuum receptacle cover\u003c\/li\u003e\n\u003cli\u003e2 filter springs, 5 ceramic filters, 10 filtration pads\u003c\/li\u003e\n\u003cli\u003eHeat-resistant pad\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is a desoldering station used for?\u003c\/h3\u003e\n\u003cp\u003eA desoldering station removes soldered through-hole components from a circuit board. The heated nozzle melts the joint and the vacuum pump pulls the molten solder out of the hole, leaving the pad and hole clean for the new part.\u003c\/p\u003e\n\u003ch3\u003eWhat temperature should I use on the YIHUA 948D III?\u003c\/h3\u003e\n\u003cp\u003eYIHUA recommends about 350–370 °C (662–700 °F) on the desoldering gun for most work. Avoid holding the nozzle on a pad for long at higher settings, as this can lift the pad.\u003c\/p\u003e\n\u003ch3\u003eHow long does the desoldering gun take to heat up?\u003c\/h3\u003e\n\u003cp\u003eSet the temperature and allow about 3 minutes of preheat. The station beeps when the desoldering gun is ready. On first use, preheat for about 5 minutes, then press the trigger to clear the factory tinning from the nozzle.\u003c\/p\u003e\n\u003ch3\u003eWhy does a new nozzle look blocked?\u003c\/h3\u003e\n\u003cp\u003eNew nozzles come pre-tinned to protect them from oxidation. It is not a blockage: after preheating, press the trigger once and the tinning is sucked out.\u003c\/p\u003e\n\u003ch3\u003eCan the YIHUA 948D III remove SMD components?\u003c\/h3\u003e\n\u003cp\u003eIt is designed for through-hole parts. For SMD and BGA work, a hot air rework station such as the YIHUA 995D+ is the right tool.\u003c\/p\u003e\n\u003ch3\u003eHow do I stop the desoldering gun from clogging?\u003c\/h3\u003e\n\u003cp\u003eFully melt the joint before pulling the trigger, adding a little fresh solder if the old joint is dry. Empty the solder chamber, clean the filter spring and nozzle with the cleaning pins, and replace the ceramic filter regularly.\u003c\/p\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eMobile, UPS and inverter repair technicians, PCB rework benches, electronics labs and colleges, and anyone who regularly removes through-hole components and wants clean holes on the first try.\u003c\/p\u003e\n\u003cp\u003eOrder the YIHUA 948D III desoldering station from Digilog.pk with delivery across Pakistan.\u003c\/p\u003e","brand":"YIHUA","offers":[{"title":"Default Title","offer_id":67650015297814,"sku":null,"price":35000.0,"currency_code":"PKR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/0764\/1366\/files\/yihua-948d-iii-desoldering-station-with-110w-soldering-iron-and-vacuum-pump-1.jpg?v=1791191278","url":"https:\/\/digilog.pk\/products\/yihua-948d-iii-desoldering-station-in-pakistan","provider":"digilog.pk","version":"1.0","type":"link"}