ROBOTIC CAR KIT Makers Space IT Lab Punjab Government eproc.punjab.gov.pk

SKU: L2,Th1
Regular price
Rs 5,800
Sale price
Rs 5,800
Regular price
Rs 0
Sold out
Unit price
Quantity must be 1 or more

RASPBERRY PI KIT Makers Space IT Lab Punjab Government eproc.punjab.gov.pk here are list of required products.

ROBOTIC CAR KIT
Sr. Item(s) Item Details / Specifications Qty
1 Arduino UNO R3 Microcontroller ATmega328P DIP ATMEGA32u4 USB Convertor Operating Voltage 5V
Input Voltage 7-12V
Input Voltage (limit) 6-20V Digital I/O Pins 14
PWM Digital I/O Pins 6 Analog Input Pins 6
Flash Memory 32 KB (ATmega328P) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328P) EEPROM 1 KB
Clock Speed 16 MHz LED_BUILTIN 13
1
2 Arduino Cable USB 2.0 Cable Type A/B Shielded
Heavy Duty
Connect Arduino Uno or any board with the USB female A port of your computer.
1
3 Arduino UNO Case
Arduino Uno Enclosure - Clear Plastic The enclosure provides slots to access each header, USB port, power jack, the
reset button, AREF and ICSP connectors, as well as feet and vents to ensure the board gets proper cooling and slide-in wall mounting slots.
All of the status LEDs on the Uno are
visible through the case thanks to light pipes embedded in the design.
1
4 Li-ion Cell 18560 Frame size: 9V Block
Dimensions (L x B x H mm): 26,2 x 15,2 x 48,5
Weight (g): 40.0
Electrochemical System: Nickel-Metal Hybrid
Capacity: 200mAh Nominal Voltage: 8.4V Jacket: Plastic
Int. Frame size to IEC: HR6F22
3
5 18650 Li-ion 3 Cell Holder Wire ends stripped and tinned
Battery Connector Dimensions: 28mm (1.1") length x 15.8mm (0.6") width x 6.3mm (0.24") height
Total Length: 18cm (7") Wire Length: 15cm (5.9")
1
6 Prototyping Board 400 Point Solderless PCB
Half size Breadboard – 400 Tie Points This is a half size breadboard with 400 tie points, it is half the length of the standard size breadboard
20-29 AWG (0.3-0.8mm) wire.
55mm x 85mm x 10mm Weight: 40 grams
1
7 Bluetooth Bluetooth HC 05
Typical -80dBm sensitivity Up to +4dBm RF transmit power
Low Power 1.8V Operation
1.8 to 3.6V
I/O PIO control
UART interface with programmable baud rate
With integrated antenna With edge connector
1
8 Switch This single-pole, double-throw (SPDT) rocker switch makes a great on/off power switch. It is rated for 10 A at 125 VAC and 6 A at 250 VAC. 1
9 IN4001 Rectifier Diode
0
1N4007
Rectifier Diode
Low Forward Voltage Drop High surge Current Capability
2
Page 28 of 86
10 Capcitor 4700uF Polar capacitor 4700uF
16V
Radial
2
11 Sensor: Ultrasonic Distance Bitmap Bitmap HC-SR04
Working Voltage: DC 5 V Working Current: 15mA Working Frequency: 40Hz Max Range: 4m
Min Range: 2cm
Measuring Angle: 15 degree
Trigger Input Signal: 10uS TTL pulse Echo Output Signal: Input TTL signal and the range in proportion Dimension: 45*20*15mm
3
12 Line Follower Sensor TCRT5000 Module
IR sensor with transistor output Operating Voltage: 5V
Diode forward Current: 60mA Output: Analog or digital data
Transistor collector current: 100mA (maximum) Operating temperature: -25°C to +85°C
3
13 Dual Motor Driver Module Input Voltage: 3.2V~40Vdc
Driver: L298N Dual H Bridge DC Motor Driver Power Supply: DC 5 V - 35 V
Peak current: 2 Amps
Operating current range: 0 ~ 36mA
Control signal input voltage range: Low: -0.3V ≤ Vin ≤ 1.5V
High: 2.3V ≤ Vin ≤ Vss
Enable signal input voltage range:
Low: -0.3 ≤ Vin ≤ 1.5V (control signal is invalid) High: 2.3V ≤ Vin ≤ Vss (control signal active) Maximum power consumption: 20W (when the temperature T = 75 °C).
Storage temperature: -25 °C ~ +130 °C
On-board +5V regulated Output supply (supply to controller board i.e. Arduino)
Size: 3.4cm x 4.3cm x 2.7cm
1
14 Jumper Wire: Male to Female strip
10 Pcs
0
10 Pcs Pack Length: 30cm
0.1" Female header contacts on one end, 0.1" male header contacts on other end
Standard 0.1" (2.54mm) spacing when placed next to each other
Wire Colors: brown, red, orange, yellow, green, blue, purple, grey, white, black
Gauge: 28 AWG (0.0126”)
1
15 Jumper Wire: Male to Male Bundle
65 Pcs
0
65 Pcs Pack Length:
25 cm x 4 Pcs
20 cm x 4 Pcs
15 cm x 8 Pcs
10 cm x 49 Pcs
0.1" male header contacts on both ends Standard 0.1" (2.54mm) spacing when placed next to each other
Wire Colors: brown, red, orange, yellow, green, blue, purple, grey, white, black
Gauge: 28 AWG (0.0126”)
1
16 Robot Chassis 1 x Car Chassis 2 x Gear Motor 2 x Car Tire
Tyre Diameter: 6.6cm 2 x Fastener
1 x Universal Wheel 1 x 4-AAcell holder
2 x 20 slot Speed Encoder
Minimum Thickness of car chasis: 3mm All parts as showin in picture
All Necessary Screws And Nuts
1
17 Ultrasonic sensor Mounts L Shaped 3mm Acrylic
Mount for Ultrasonic distance sensor
3
18 Nut Bolts 3mm Diameter 1 Inch Length 6
19 Component Box Capacity: 7.9L / 267.13oz / 33.39cups Length: 323mm / 12.72in
Width: 245mm / 9.65in Height: 137mm / 5.39in Hinged clips lock Stackable
Clear Plastic
1
No. of Items in Kit 34